Formwork

Pilosio formwork stackable modular systems (circular type, beam, ground, and metal formwork used for purification plants, retaining walls, walls, elevator shafts, circular tanks, impost blocks, etc) are designed in compliance with the highest safety standards for be easily integrated in any type of worksite, thanks to the modularity of the elements, it’s easy handling and assembly and the quality of the materials used

Is an especially light formwork system to cast concrete walls, load-bearing walls, columns, retaining walls and so forth. It is composed of base modules whose dimensions are 60/75 x 300 cm which are made up of a high-resistance sectioned-steel frame and a treated multilayer panel.
In order to guarantee high standards of quality, after the steel frame has gone through the cleaning and roughing procedures it is painted via immersion and dried at high temperatures. The result is a frame which is highly resistant to abrasions and oxidation. The multilayer treatment that the panel undergoes allows the module to last longer, speeds up the stripping operations, and also saves on the use of stripping materials.
The main characteristic of the MINIMAG system is its lightness. Each module weighs about 72 kg and also allows manual handling along with increased speed during raising and stripping operations.
The individual modules, which are compatible with MAGNUM, formwork system, can be employed both vertically and horizontally.
In addition to the base modules, whose dimension are 60/75 x 150 cm, other modules with different measurements are available along with infill and complementary accessories like the stripping corners, the brackets, and so forth.

SVELT is the modular formwork system that allows for the realization of circular-base walls. The walls circumference can be regulated thanks adjustable rods. Once the radius has been set the modules will not deform, thus allowing for an additional level with the same curvature. In this way SVELT can also be used as a climbing formwork. Its versatility also allows for the realization of wall brackets with an “s” shape ovoid base as well as linear wall brackets. With its 6000 kg/m2 capacity, the new SVELT is a much more reliable tool to toughness and stability the two rods and the supporting steel omegas allow lifting and repositioning without neither a change in curvature or deformations. This allows it to be also used as a climbing formwork.
The counter-cast treated multilayer surface with phenolic film can have thicknesses that vary depending on the curvature that is to be applied to SVELT.
Once the casting is done, the system, being composed of modules with a maximum width of 240 cm, can be transported using any kind of truck.

P300 is a modular formwork system used to cast large-dimension walls, load-bearing walls, columns and retaining walls. It is composed of base modules whose dimensions are 100 x 300 cm made of a high-resistance sectioned-steel frame and a treated multilayer panel.
In order to guarantee high standards of quality, after the steel frame has gone through the cleaning and roughing procedures it is painted via immersion and dried at high temperatures. The result is frame which is highly resistant to abrasions and oxidation.
The multilayer treatment that the panel undergoes allows the module to have a longer life span, speeds up the stripping operations, and also saves on the use of stripping materials.
The modules can be used indifferently both vertically and horizontally.
The accompanying equipment (contrast beams, clamps, bearing brackets, and cone-shaped corners, etc.) allows you to utilize the P300 modular system at the best of its capabilities.
Among the accessories, the rapid-clamp guarantees maximum assembly and disassembly. Just a hammer hit is literally all you need to clasp it.

MAGNUM is a modular formwork system used to cast large-dimension walls, load-bearing walls, columns, retaining walls. It is comprised of base modules whose dimensions are 240 x 300 cm, made up of a high-resistance sectioned-steel frame and a treated multilayer panel. In order to guarantee high standards of quality, after the steel frame has gone through the cleaning and roughing procedures it is painted via immersion and dried at high temperatures. The result is a frame which is highly resistant to abrasions and oxidation. The multilayer treatment that the panel undergoes allows the module to have a longer life span, speeds up the stripping operations, and also saves on the use of stripping materials. The modules that are compatible with the MINIMAG system are suitable for the realization of large surfaces and can be used indifferently both vertically and horizontally.
The accompanying equipment (contrast beams, clasps, bearing brackets, and cone-shaped corners, etc.) allows you to utilize the MAGNUM modular system at the best of its capabilities.